INDICA SCIENTIFIC-Scientific Instruments Exporters & Equipments Manufactures, Supplier, Trader

CHEMISTRY


IS7002A BALANCE ANALYTICAL

Short triangular beam, with rider scale. The beam supports are extended and relieve the agate knife edges when at rest. Pillar is highly finished and removable pans are suspended by stirrups from double hooks. The balance is mounted in a polished wooden case, fully glazed. Complete with rider slide, levelling screws. Capacity 200 gm, sensitivity 0.1 mg.

BALANCE ANALYTICAL
IS7002C BALANCE MASS

Weights are made of stainless steel corrosion resisting quality, arranged in velvet lined case of seasoned wood nicely polished with forceps and two riders 10 mgm. each.

BALANCE MASS
IS7002D BALANCE PHYSICAL

General purpose balance for student use. Cast alloy beam fitted with balancing nuts, agate bearings and knife edges. The hangers have double hooks for specific gravity experiments. Detachable nickel plated brass pans, enamelled central pillar, plumbline, mounted in polished wooden case with levelling screws. Capacity 250 gm, sensitivity 2 mg.

BALANCE PHYSICAL
IS7002E BALANCE TRIPPLE BEAM

Single pan, to weigh up to 2610 gm. The balance has three beams with sliding masses giving weighing capacity of 610 gm which can be increased to 2610 gm with three supplementary masses. Stainless steel pan of 150 mm diam. Provided with spring loaded zero adjuster & magnetic damping for rapid weighing.

BALANCE TRIPPLE BEAM
IS7002F BALANCE DOUBLE BEAM

An accurately balanced magnetic needle, strongly magnetised is fitted with hardened steel pivot marking in jewels cup bearings. The needle can be easily removed for reversal. The inclination scale is of chrome brass graduated in degrees 0-90 four times. The case is made of non-magnetic steel alloy, duco painted, has easily removable plate glass window and rotates fully on a heavy brass base, is rotation being measured by a brass chrome dial reading 0-360o. It is fitted with levelling screw and spirit level.

BALANCE DOUBLE BEAM
IS7003A BAROMETER FORTINS

For school/college laboratories. Nominal 6 mm bore glass tube. With engine divided dual scales 675 to 820 x 1 mm Hg and 26.5 to 32.5 x 0.05 inch Hg. Verniers reading 0.05 mm and 0.002 inch. Mounted on polished wooden board for wall mounting. Supplied without mercury but with instructions for filling.

BAROMETER FORTINS